How it works?

The pogaBot Cleaning Robot is intelligently controlled to operate powerfully and efficiently, cleaning around and under furniture and reaching right into corners. The robot uses three kinds of movement during vacuuming – spirally, diagonally and straight along the walls. The pogaBot repeats these movements to clean thoroughly and effectively.

The robot has three cleaning modes:

1. press S – for cleaning a small area (approx. 10-15m2)
2. press M – for a mid-size room (approx. 15-25m2)
3. press L – for larger areas (25m2 or bigger)

The time of the cleaning depends on the size of the room, but in general, S ~30 minutes, M ~40 minutes and L ~60 minutes.

The sensing parts of the robot ensure intelligent motion, while the brushes sweep up the dust! The pictures above show the main parts of the robot.

1. Smart bumper

   The smart bumper helps pogaBot to move around objects on the floor, without damaging the objects themselves.

2. Main brushes

   Two counter-rotating brushes and a powerful vacuum reach deep into your carpet to remove dirt, dust and pet-hair.

3. Rotating side brush

   The side brush reaches into corners and along walls to clean right up to the edge.

4. Squeegee

   The squeegee behind the main brushes helps to draw dust in to the vacuum mouth of the robot.

5. Rechargeable and replaceable battery

   Total charge time is 4-5 hours, for an operating time of 90 minutes – enough to clean 70 m² (4 rooms) thoroughly.

6. Infrared sensors

   Stairs and vertical drops are avoided using the infrared sensors.

7. Self-adjusting wheel level

   The wheels automatically self-adjust between carpets and hard floors, and when passing over door sills and other low obstacles.

8. Air-filter cartridge

   The air filter ensures no dust escapes into the air from the particle bin during cleaning.

Share